Guide · 10 min read
Building maintenance company Dubai: what an annual maintenance contract should cover
A practical guide for building owners and facilities managers on what an annual maintenance contract in Dubai should cover: planned and reactive works, response times, exclusions, spare parts and how out-of-scope repairs are priced and approved.
By the Beavcon engineering team Published Updated Reviewed by the Technical Manager Registered with the Society of Engineers UAE and Abu Dhabi Municipality
A building maintenance company in Dubai should give you an annual maintenance contract that separates planned preventive work from reactive call-outs, fixes response and completion times, and tells you exactly how out-of-scope repairs are priced and approved before any work starts. Without those three things, an AMC is a call-out service with a retainer, not a maintenance plan. This guide sets out what a practical AMC should cover, so you can compare proposals and avoid paying twice for work that should already be in the contract.
What should an annual maintenance contract for a building include?
A workable AMC starts with a defined asset register, not a general promise to “maintain the building”. The contractor should list the systems and areas covered: electrical distribution, lighting, plumbing and drainage, HVAC plant and controls, firefighting equipment, doors and ironmongery, common-area finishes, and any landlord or tenant interface items you expect them to inspect. If an asset is not listed, assume it is excluded.
The contract should then divide the work into two streams: planned preventive maintenance and reactive maintenance. Planned work is scheduled by calendar or runtime: filter changes, coil cleaning, pump checks, emergency light tests, water tank inspections, sump pit cleaning, and similar tasks. Reactive work is what happens when something fails or a tenant reports a fault.
A clear AMC also states who supplies consumables and spare parts, how call-outs are logged, what reports you receive, and how the contractor escalates a fault they cannot close on the first visit. The scope should name the buildings, floors, plant rooms and common areas included, and list exclusions such as tenant premises, specialist equipment, or works requiring authority approval.
Finally, the contract should define the commercial mechanics: fixed annual fee, included call-out allowance, hourly or visit rates beyond the allowance, markups on materials, and how variations are approved. A building maintenance company in Dubai should be able to show you all of this in the proposal, not after the first invoice.
What is the difference between planned and reactive maintenance?
Planned maintenance is scheduled work that reduces the chance of failure. It includes inspections, cleaning, lubrication, adjustments, testing and replacement of wear items on a set frequency. The contractor knows in advance what they will do each month, and you can track completion against a programme.
Reactive maintenance is the response to a fault, breakdown or tenant complaint. It cannot be scheduled, so the contract must define how quickly the contractor responds and how quickly they restore the service. Response time is usually measured from the logged call to the technician arriving on site; completion time is measured to the point the fault is closed or a temporary measure is in place.
A common mistake is to buy an AMC that is almost entirely reactive. You pay a retainer for a call-out service, while the failures that generate call-outs are never reduced. A balanced AMC puts most of the value in the planned schedule and treats reactive work as the overflow. In Dubai, ask for the condenser, coil and controls checks to be dated in the calendar before the summer cooling season starts. Ask the contractor to show the planned maintenance calendar for the first year, not just the response-time table.
How are out-of-scope repairs handled under an AMC?
Out-of-scope repairs are works not listed in the asset register or not caused by normal wear and tear. Examples include damage from tenant alterations, replacement of a major item that has reached end of life, upgrades required by an authority, or works that need a permit or design input.
The AMC should state the approval route before the contractor starts. Typically the contractor identifies the fault, photographs it, and issues a quotation for the repair as a variation. You approve or reject it in writing. If the repair is urgent and cannot wait for approval, the contract should define what the contractor may do to make the situation safe, and how that is documented afterwards.
Pricing should be transparent. The contract should list the rates that apply to out-of-scope work: labour by trade and hour, call-out fees, material markups, and any minimum charges. Without those rates in the contract, every repair becomes a negotiation. A building maintenance company in Dubai should be able to give you a rate card with the AMC, so out-of-scope pricing is predictable from day one.
What response and fix times should an AMC define?
Response and fix times should be set by priority, not by a single number. A typical structure is:
- Emergency: water leak, electrical hazard, or a fault on a life-safety system that the contract lists as covered. Response within hours, with a temporary make-safe action on the first visit.
- Urgent: one toilet out of order, one AC unit down in a common area, a failed light in a stairwell. Response same day or next working day.
- Routine: a sticking door, a dripping tap, a cosmetic defect. Response within a few working days, scheduled at the next planned visit where practical.
The contract should also define what happens when the contractor misses the response time: a service credit, an escalation to a supervisor, or a report to the facilities manager. Response time is only useful if it is measured and reported. Ask for a monthly log that shows each call-out, the time it was logged, the time the technician arrived, and the time it was closed.
What should the monthly report include?
A maintenance report is the evidence that the AMC is being delivered. At minimum it should include:
- Planned tasks completed in the period, with dates and any deviations.
- Reactive call-outs logged, with priority, response time and closure status.
- Open faults and their age.
- Spare parts and consumables used.
- Safety observations or defects found during inspections.
- Recommendations for out-of-scope repairs, with quotations where issued.
The report should be short enough to read in one sitting but detailed enough to audit. If the contractor cannot produce a report that ties each planned task to a date and a finding, the AMC is not being managed; it is being improvised.
What is typically excluded from an AMC?
Exclusions vary by contract, but common ones are:
- Tenant premises and tenant-owned equipment.
- Specialist systems such as lifts, fire alarm and firefighting systems, BMS software, security systems or swimming pool plant, unless separately listed. These are often maintained by an approved specialist, so confirm with the building management or the relevant authority who may service them.
- Works requiring authority approval, design or structural changes.
- Replacement of major plant at end of life.
- Damage from misuse, tenant alterations or third parties.
- Consumables beyond an agreed allowance.
Exclusions are not a defect in the contract; they are a boundary. The problem is when the boundary is not written down. A good AMC lists exclusions as clearly as inclusions, so you know what you are paying for and what will arrive as a separate quotation.
How should spare parts and materials be handled?
The contract should state who supplies what. Consumables such as filters, lamps, belts and seals are usually included in the annual fee up to an agreed value or quantity. Larger spare parts, such as a pump, a fan motor or a control board, are usually quoted separately.
Material markups should be stated in the contract. If the contractor supplies a part, the markup should be known in advance, not discovered on the invoice. Some owners prefer to supply critical spares themselves; if so, the contract should state who stores them, who installs them, and who is responsible if a supplied part fails.
For a building maintenance company in Dubai, a common and avoidable delay is not knowing exactly what is installed. Ask the contractor to record make, model and serial numbers for major plant during the first planned cycle, so future replacements are specified correctly.
What should you check before signing an AMC?
Before you sign, walk the building with the contractor and check the following:
- The asset register matches what is actually on site.
- The planned maintenance calendar covers the systems that fail most often in your building.
- Response times are defined by priority, not by a single vague promise.
- The rate card for out-of-scope work is attached to the contract.
- The monthly report format is agreed, with a sample attached.
- Exclusions are listed in writing.
- The contractor has the licences and insurance required for the trades they will perform.
- The contract states how call-outs are logged and how you can audit the log.
If any of these items is missing, the AMC is not ready to sign. The fix is usually a short addendum, not a new tender.
How does an AMC fit with a building’s existing maintenance regime?
Many buildings already have a facilities team, landlord or owners’ association rules, and authority inspection cycles. The AMC should fit into that regime, not replace it. The contractor should work to the building’s access rules, goods-lift bookings, working-hours restrictions and permit-to-work system where one exists.
Authority-related maintenance, such as fire system testing or water tank cleaning, may need to be coordinated with the building management and documented for inspection. The contractor should tell you which tasks generate records you need to keep, and hand them over in a format you can file. Confirm with the building management or the relevant authority what they expect, as requirements vary by building and jurisdiction.
A practical AMC also defines the interface with other contractors. If a lift contractor, a BMS provider or a security contractor is already on site, the AMC should state who coordinates with them and who is responsible when a fault spans two systems.
What makes an AMC worth the annual fee?
The value of an AMC is not the number of visits; it is the reduction in surprises. A well-run planned schedule can catch a failing pump before it floods a plant room, find a loose connection before it trips a board, and replace a filter before the coil freezes. The reactive service is the safety net, not the product.
When you compare proposals from a building maintenance company in Dubai, look for the contractor who can show you the planned calendar, the asset register and the rate card before you sign. Those three documents tell you more about how the contract will run than any number of promises in the covering letter.
For a fixed-scope AMC with defined response times, upload your building details and current maintenance records through BuildScope, or request a site visit to walk the systems on site before you commit. If you are setting up an AMC for the first time, read AMC SLA commercial building Dubai first year: what to cover and how to prequalify a building contractor in Dubai before you shortlist.
How Beavcon handles this
Beavcon delivers Annual Maintenance (AMC) in Dubai and Abu Dhabi: pre-agreed response times, rates and markups for recurring minor works and maintenance.
To start, send us your enquiry: upload the drawings and scope through BuildScope, or request a site visit through our contact page.
General guidance; confirm requirements with the relevant authority or your consultant.